E-MEM XLP 8040 Industrial RO Membrane
BW (Brackish Water) membrane is an aromatic polyamide composite membrane element for desalting brackish Water developed by Hangzhou E-MEM Environmental Technology co., LTD.
nBW has the characteristics of low operating pressure, high flux, and high rejection rate. It has a high removal rate for dissolved salts, TOC, SiO2, and other substances, especially for the preparation of high purity water in the electronic and power industries.
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
n
E-MEM Membranes
n
BW has the characteristics of low operating pressure, high flux, and high rejection rate. It has a high removal rate for dissolved salts, TOC, SiO2, and other substances, especially for the preparation of high purity water in the electronic and power industries.
n
BW series membrane elements are suitable for desalination of surface water, groundwater, tap water, and municipal water with a salt content of less than 8000ppm. They are mainly used in the fields of industrial pure water and power plant boiler make-up water of various fields, as well as brackish water applications such as high-concentration saline wastewater and beverage water manufacturing.
nBW has the characteristics of low operating pressure, high flux, and high rejection rate. It has a high removal rate for dissolved salts, TOC, SiO2, and other substances, especially for the preparation of high purity water in the electronic and power industries.
nBW series membrane elements are suitable for desalination of surface water, groundwater, tap water, and municipal water with a salt content of less than 8000ppm. They are mainly used in the fields of industrial pure water and power plant boiler make-up water of various fields, as well as brackish water applications such as high-concentration saline wastewater and beverage water manufacturing.
n
Applications
n
n
Domestic Water Treatment
n
n
Commercial Water Treatment
n
n
Industrial Water Treatment
n
Performance parameters of the membrane element
n
| Models | Permeate Flow GPD（m3/d) | Salt rejection（%） | Active membrane area ft2 (m2) | Testing pressure Psi (MPa) | Testing condition |
| BW-4040 | 2400(9.1) | 99.5 | 90.4(8.4) | 225(1.55) | 2000ppm NaCl |
| BW-365 | 9500(36.1) | 99.5 | 365(34.0) | 225(1.55) | 2000ppm NaCl |
| BW-400 | 10500(39.7) | 99.5 | 400(37.0) | 225(1.55) | 2000ppm NaCl |
| Other Testing Condition (˚C) | Tempetaure (˚C) | 25.0 ±1.0 | |||
| Feedwater pH | 7.5±0.5 | ||||
| recovery（%） | 15.0±1.0 | ||||
| available | Dry & Wet | ||||
n
Specification And Size
n
n
n(A)
n
n
n
n(B)
n
E-MEM® (BW) Series Membrane Size
n
| Model | A(±2.0mm) | B(±1.0mm) | C(±0.1mm) | D(±0.1mm) | Pic |
| BW-4040 | 1016 | 100 | 19.1 (OD) | 26.7 | a |
n
How An RO Membrane Is Made
n
Below is a video that explains how an RO membrane is made
nhttps://youtu.be/c640QM5Ccyw
n
How An RO Membrane Works
n
Below is a video that explains how an RO membrane works
nhttps://youtu.be/jOYZWPhjUI4
n
Ultimate service conditions
n
-
n
- Max. operating pressure : 600psi（4.14MPa)
- Max. feed water temperature : 45℃
- Max. feedwater. flow: 75GPM（17m3/h）（BW-365、BW-400）16GPM（3.6m3/h）（BW-4040）
- Max. feed SDI 15: 5
- Feed free chlorine concentration: ＜0.1ppm
- pH range, continuous running: 3~10
- Feed PH range when chemical cleaning: 2~12
- Maximum pressure drop(single-membrane): 15 psi (0.1MPa)
n
n
n
n
n
n
n
n
n
Matters Needing Attention
n
-
n
- The data and information provided by Hangzhou-MEM Environmental Technology Co., Ltd in this sample are all obtained through long-term experiments, and we are convinced that these data and information are accurate and effective. Customers are requested to use the product in strict accordance with the design, use, and maintenance requirements of the product and keep relevant data records. Hangzhou E-MEM Environmental Technology Co., Ltd shall not bear any consequences arising from customers’ failure to use and maintain the products in accordance with the conditions provided by this sample.
- The permeate flow listed in the table is the average value, and the deviation of a single membrane element of permeate flow is±15%.
- Before products leaving the factory, the dry membrane element has no protective liquid, while the wet membrane element is stored and treated with 1.0% sodium bisulfite (10% glycerin antifreeze added in winter) solution and vacuum-packed.
- Dry membrane elements should always be kept wet after wetting. When wet membrane element is not used for a long time, in order to prevent the growth of microorganisms, it is recommended to soak the membrane element with protective liquid containing 1.0% sodium bisulfite (food grade)(prepared with RO production water).
- For initial use of membrane elements, it is recommended to flush first at low pressure for 15-25 minutes and then at high pressure for 60-90 minutes (water production not less than 50% of the system design).All production and concentrated water shall be discharged within the first hour of membrane element operation.
- It is prohibited to add any chemical agent that has an impact on the membrane element in storage and operation. If such chemical agent is violated, Hangzhou E-MEM Environmental Technology Co., Ltd will not bear all the consequences arising therefrom.
n
n
n
n
n
n
Shipping policy
At our Company, we understand the importance of timely delivery. We offer a variety of shipping options to suit your needs, including standard, expedited, and express shipping. Our dedicated team works diligently to process and dispatch your orders promptly, aiming to deliver them to your doorstep within the estimated timeframe.
We strive to provide fast and reliable shipping to our customers. Here\\\’s everything you need to know about our shipping process:
- Dispatch: Within 24 Hours
- Free shipping across all products on a minimum purchase of $99.
- International delivery time 5 to 7 business days
- Cash on delivery might be available
- Easy 30 days returns and exchanges
Please note that delivery times are estimates and may vary depending on factors such as product availability, destination, and carrier delay
Returns policy
We want you to be completely satisfied with your purchase from our website. If for any reason you are not entirely happy with your order, we\\\’re here to help. Certain exclusions and conditions may apply, so we encourage you to review our detailed return policy for more information. Rest assured, our goal is to ensure your complete satisfaction with every purchase you make from our website
- Returned items must be unused, undamaged, and in the same condition as received.
- Original tags, labels, and packaging must be intact and included with the returned item.
- Proof of purchase, such as your order confirmation or receipt, is required for all returns.
