Water Fountain with UF – Floor Standing

Water Fountain with UF – Floor Standing — Plumbed‑in Ultra‑Filtration Drinking Station

n

The Water Fountain with UF – Floor Standing is a high‑capacity hydration station designed for busy indoor areas such as offices, schools, gyms, and public reception zones. With a built‑in 4‑stage ultrafiltration (UF) system, the unit connects directly to mains water and delivers chilled, ready‑to‑drink water through both a bubbler tap and a swan‑neck bottle filler. Water Purification Systems+2Reverse Osmosis+2

n
n

Why this Floor‑Standing UF Fountain is the Smart Choice

n

This floor‑standing water fountain uses an advanced UF filtration system to remove suspended particles and bacteria while retaining beneficial minerals. Its stainless‑steel build, power usage of ~180 W, and cold‑water output of up to 10 L/hour at 3‑6 °C make it ideal for high‑traffic settings. Reverse Osmosis+1

n

Moreover, the direct connection to the mains supply eliminates the need for bottled water refills or manual water change‑outs. That saves both time and plastic waste. In addition, the unit’s design means little maintenance is required beyond periodic filter changes every 6‑12 months (depending on water source quality). Water Purification Systems

n
n

Key Features & Specifications

n

n
• Built‑in 4‑stage UF filtration (K33 filters) – removes bacteria and fine particles.

n

• Cold tank capacity: 5 L; cold water output approximately 10 L/hour at 3‑6 °C.

n

• Operates on 220‑230 V, 50 Hz, ~180 W power draw.

n

• Floor‑standing, direct‑plumbed design with bubbler and swan‑neck filler taps.

n

• Ideal for municipal water supply – water quality should be within normal drinking standards (not suitable for untreated borehole water without pre‑treatment).

n

n

Benefits for Your Site or Facility

n

By installing the Water Fountain with UF – Floor Standing, you enable staff, visitors or students to access immediately chilled, ultra‑filtered drinking water. This leads to better hydration, fewer single‑use bottles, and a professional hydration station aesthetic. Because the fountain is floor‑standing and plumbed in, it requires minimal intervention — simply replace the filters when needed, and clean the tap surfaces regularly.

n
n

Installation & Maintenance Tips

n

n
• Ensure a stable, straight length of pipe to the mains feed and an appropriate drainage area for any condensation or overflow.

n

• Use a pressure‑regulating valve if the inlet pressure is high, to extend the life of the filtration media.

n

• Monitor filters and replace them every 6‑12 months; if incoming water is highly turbid or heavily chlorinated, consider a pre‑filter to protect the UF stages.

n

• Wipe down the external surfaces and taps regularly to maintain hygiene and appearance.

n